How to Replace Chevy Traverse Rear Coil Springs?

You will get efficient and thoughtful service from Hengguang.

How to Replace Chevy Traverse Rear Coil Springs?

If you own a Chevy Traverse, you may eventually need to replace the rear coil springs due to wear and tear. It’s essential for maintaining the vehicle's handling and ride comfort. The replacement process can seem daunting, but with the right tools and a bit of patience, you can accomplish it yourself. Here’s a step-by-step guide on how to replace the rear coil springs on your Chevy Traverse:

1. Gather Necessary Tools and Materials
   • Jack and jack stands
   • Wrenches (both standard and metric)
   • Socket set
   • Coil spring compressor
   • Tape measure
   • Safety goggles and gloves
   • Replacement coil springs
2. Prepare Your Vehicle
   • Park your Chevy Traverse on a level surface.
   • Engage the parking brake to prevent the vehicle from rolling.
3. Lift the Vehicle
   • Using a jack, lift the rear of the vehicle.
   • Place jack stands under the frame to secure the vehicle.
4. Remove the Wheel
   • Use a lug wrench to loosen and remove the lug nuts.
   • Take off the wheel and set it aside.
5. Access the Coil Spring
   • Locate the shock absorber connected to the rear suspension.
   • Remove the bolts securing the shock absorber using a socket wrench.
   • Take out the shock absorber to give you more space to work.
6. Compress the Coil Spring
   • Place the coil spring compressor onto the coil spring.
   • Carefully tighten the compressor until the coil springs are slightly compressed.
   • Always follow the manufacturer instructions for the compressor to avoid accidents.
7. Remove the Old Coil Spring
   • With the spring compressed, remove the upper and lower spring mounts, usually secured by bolts.
   • Once the mounts are removed, carefully detach the coil spring from its perch.
8. Install the New Coil Spring
   • Position the new coil spring into the spring perch.
   • Carefully release the spring compressor to fit the coils into the mounting brackets.
   • Reinstall the upper and lower spring mounts securely.
9. Reassemble the Components
   • Reinstall the shock absorber and secure it with bolts.
   • Put the wheel back on and tighten the lug nuts.
   • Remove the jack stands and lower the vehicle back to the ground.
10. Test Drive
    • Once everything is secured, take your vehicle for a test drive.
    • Monitor for any unusual noises or handling issues.

Replacing the rear coil springs on your Chevy Traverse can be a rewarding DIY project. By following these steps, you can ensure that your vehicle continues to run smoothly and safely.

Click here to get more.

The company is the world’s best chevy traverse rear coil spring replacement supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.